Legrand 2400 Series Steel Plugmold Multioutlet System with User Manual download pdf

The Wiremold Company

U.S. and International:

60 Woodlawn Street • West Hartford, CT 06110

1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251

Canada:

850 Gartshore Street • Fergus, Ontario N1M 2W8

1-800-741-7957 • FAX 519-843-5980

42411 – Updated July 2002 – For latest specs visit www.wiremold.com

NUMBER OF CONDUCTORS

(40% FILL)

WIRE SIZE O.D. WITHOUT WITH Plugmold

THHN/THWN Inches [mm] Devices Receptacles

14 AWG 0.111 [2.6] 57 –

12 AWG 0.130 [3.3] 41 10

10 AWG 0.164 [4.2] 26 6

2400 RACEWAY WIRE FILL CAPACITY FOR POWER

Cut hot, neutral, and ground wires of V2400 Raceway Harness at location

of raceway base entrance knockout that will be removed.

Remove 1/2" entrance knockout from base and attach 1/2" feed connector

(not supplied).

Mount raceway base with harness using # 10 Panhead screws.

Connect harness to feed wires using one of the approved wiring methods

shown above in Step 2A or 2B.

W30 WIRE CONNECTORS – HOW TO USE

W30 pressure type connectors

(available separately) are for

common connection of 2, 3, or

4 No. 12 or No. 14 solid conductors.

NOT TO BE USED TO CONNECT GROUNDING CONDUCTORS.

BACK FEEDING FROM FLEXIBLE OR RIGID METAL CONDUIT

COUPLING TWO PLUGMOLD V2400 WIRED SECTIONS TOGETHER TO EXTEND RUN (USING 2401 COUPLING)

Insert 2401 Coupling halfway into the end of raceway

base. Mount raceway using No. 10 Panhead screws.

Insert second raceway base section onto the

opposite end of the 2401 Coupling. Mount second

raceway section with #10 Panhead

or Flathead wood screws.

Connect black and white harness wires to black

and white feed wires with W30 Wire Connectors*

inserting only conductors of same color in a

connector. See “W30 Wire Connectors…How To

Use”. Connect green grounding wire in harness

to insulated ground conductor in-feed which is

connected directly to service grounding terminal,

using insulated method approved for equipment

grounding connections.

Do not use W30 Wire Connector for this purpose.

Close up unused wire leads at ends of harness

as shown.

Do not connect leads together.

V2400B

Base

2401

Coupling

Wired Section Base

And Cover Grounded

Conventionally

Isolated Ground Service

Grounding Terminal**

*Available separately

Feed Wires

Conventional

Ground

Insulated/Isolated

Receptacle Grounding

Wire (Green)

Black & White

Harness Wires

Orange Receptacle –

All receptacles to

comply with color

identification requirements

CAUTION: Green insulated/isolated grounding

conductor in receptacle harness must be

connected directly to service grounding

terminal through insulated grounding

conductor in-feed. Grounding circuit will not

be isolated if green harness conductor is

connected to Wired Section raceway. Since

unit is not grounded through mounting, a

separate grounding conductor connection

is required.

To preserve insulated/isolated grounding,

insulated ground wire in-feed must be

connected to service grounding terminal,

NOT to panel.

FEEDING WIRED SECTIONS FROM NONMETALLIC-SHEATHED CABLE

Connect feed (black & white wires, and insulated ground wire which

is connected directly to service grounding terminal) to Wired Section

harness. Connect bare (conventional) ground wire to 2409 Ground

Clamp (available separately).

Close up lead ends using

approved method.

Bare Conventional

Ground Wire

2409 Ground Clamp*

V2400 Base

TYPICAL FEED CONNECTION DIAGRAM

**See 2002 NEC, Section 250.96(B)

V2400B

Base

Feed Conduit

1 2

24S PLUGMOLD 2

Summary of Contents

Page 1

The Wiremold CompanyU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233

Page 2 - 24S PLUGMOLD

Wiremold Electrical Systems conform to and should be installed and properly grounded in compliance withrequirements of the current National Electrical

Comments to this Manuals

No comments

Legrand 2400 Series Steel Plugmold Multioutlet System with User Manual

Browse online or download User Manual for Hardware Legrand 2400 Series Steel Plugmold Multioutlet System with. Legrand 2400 Series Steel Plugmold Multioutlet System with Insulated/Isolated Grounding Receptacles User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Legrand 2400 Series Steel Plugmold Multioutlet System with