Legrand 363484-01 User Manual download pdf

301 Fulling Mill Road, Suite G

Middletown, PA 17057

Phone (800) 321-2343 / Fax (717) 702-2546

www.onqlegrand.com

Page 1 of 2

INSTRUCTION/INSTALLATION SHEET

1x11 Telecom Modules

IS-0011 REV. G

1. Introduction

The On-Q/Legrand 1x11

Telecom Modules provide a

structured method for

distributing telephone service

and wide area network data

service throughout the house.

This instruction sheet covers the

1x11 Standard Telecom Module

(P/N 363484-01) and the 1x11

KSU/PBX Module (P/N 363485-

01) shown in Figure 1. The

modules can be directly

mounted in any On-Q style

enclosure.

2. Description

Both 1x11 Telecom Modules come with one 110-style punch down connector for connecting to the 4-line

incoming telecom service and eleven 110-style punch down connectors for connecting to the telecom outlets in

each room. Both modules also come with a 20-pin posted connector and spade terminal for an optional surge

protector (P/N 363487-01), an RJ-45 jack for test or local handset attachment, an RJ-45 jack for connection to an

RJ-31x security interface and a 4-position switch to allow separation of the incoming lines from the outlets for

testing purposes. Both modules also come with an identical WAN interface area with incoming and outgoing RJ-

45 jacks and 110-style punch down connectors. The 1x11 KSU/PBX Module also comes with two 50-pin style

telco connectors typically connected to KSU/PBXes or punch down blocks.

NOTE: This product is listed as UL 1863 – Communications Circuit Accessories and complies with

General Approval NS/G/1235/W/100025.

3. Installation

A. Mounting in enclosure (see Figure 2)

1) Align tabs on module with slots in enclosure.

2) Insert tabs by angling module away from the back of the enclosure

and sliding forward.

3) Rotate the module and insert fasteners on module into corresponding

holes in the enclosure. (Plunger must be in the pulled out position for

fastener to engage hole.)

4) Push plunger in to lock module in place. Pull on module to assure

module is locked properly in place.

B. Incoming Service Cable Installation (see Figure 3)

1) Route incoming service Cat 5e cable to “Line In” 110-style punch down

block, allowing slack for bundling, and cut cable about 2” past

connector.

Figure 2

Figure 1

on·Q on·Q

1 2

1x11 Telecom Modules 1

Summary of Contents

Page 1 - 1x11 Telecom Modules

301 Fulling Mill Road, Suite G Middletown, PA 17057 Phone (800) 321-2343 / Fax (717) 702-2546 www.onqlegrand.com

Page 2

301 Fulling Mill Road, Suite G Middletown, PA 17057 Phone (800) 321-2343 / Fax (717) 702-2546 www.onqlegrand.com

Related models: 363485-01

Comments to this Manuals

No comments

Legrand 363484-01 User Manual

Browse online or download User Manual for Hardware Legrand 363484-01. Legrand 363484-01 User Manual

Summary of Contents

Related models: 363485-01

Comments to this Manuals

Related products and manuals for Hardware Legrand 363484-01