Legrand 364596-01 User Manual download pdf

301 Fulling Mill Road, Suite G

Middletown, PA 17057

Phone (800) 321-2343 / Fax (717) 702-2546

www.onqlegrand.com

Page 1 of 1

INSTRUCTION/INSTALLATION SHEET

12-PORT VIDEO INTERFACE MODULE

IS-0191 REV. A

1. Introduction

The On-Q/Legrand 12-Port Video Interface Module, P/N 364596-01, provides a convenient interface for coaxial cables

in the On-Q enclosure. The individual cables can then be jumpered to On-Q Video Modules for the amplification,

combining and distribution of these signals. The Interface Module also provides a convenient location for the

termination of any unused coaxial cable to be used in future applications. This module can be installed directly into

any On-Q style enclosure.

2. Description

The On-Q 12-Port Video Interface Module is a half width module (2.00” H

x 6.42” W), which is mounted utilizing the On-Q style tab and plunger

arrangement. This Video Module has 12 low-loss “F” style fittings for

connecting all incoming and outgoing signals. The module allows for 12

signal inputs/outputs. The module plate is black powder coated steel

(see Figure 1).

3. Installation

A. Mounting into an On-Q enclosure (see Figure 2)

1. Select the location in the enclosure to allow easy access of the input and output cables.

2. Align the tabs on the module with the slots in the enclosure. Insert the tabs by angling the module away from

the back of the enclosure.

3. Rotate the module and insert the plunger/grommet on the module into the corresponding hole on the back

plane of the enclosure. (Plunger must be in pulled out position for it to engage the hole)

4. Push the plunger in to lock the module in place. Pull on the module to ensure the module is locked properly

in place.

B. Cable Connections

1. Identify cable(s) and route to fitting(s) on module. In

routing cable, allow slack for bundling cables to the side.

Trim cable to allow lose loop of cable to the connection.

2. Attach a Series 6 “F” connector to the cable. Connect to

fitting on module and finger-tighten.

3. Attach RG6 cables from module to desired locations in

enclosure.

NOTE: Recommended location for this module is the upper

left side; however, module may be mounted in any available

space.

Figure 1

Figure 2

IS-0191 REV. A 1

Summary of Contents

Page 1 - IS-0191 REV. A

301 Fulling Mill Road, Suite G Middletown, PA 17057 Phone (800) 321-2343 / Fax (717) 702-2546 www.onqlegrand.com

Related models: 363915-01

Comments to this Manuals

No comments

Legrand 364596-01 User Manual

Browse online or download User Manual for Hardware Legrand 364596-01. Legrand 364596-01 User Manual

Summary of Contents

Related models: 363915-01

Comments to this Manuals

Related products and manuals for Hardware Legrand 364596-01