Legrand ALDS4000 Designer Series Large Raceway Activation User Manual download pdf

ALDS4000 Activation

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 43373R1 – Updated April 2006

Wiremold / Legrand Electrical Systems conform to and should be

installed and properly grounded in compliance with requirements

of the current National Electrical Code, Canadian Electrical

Code, or codes administered by local authorities.

All electrical products may represent possible shock or fire

hazard if improperly installed or used. Wiremold electrical

products are UL listed to U.S. and Canadian safety

standards, made for interior use only, and should be installed

in conformance with current local and/or the National

Electrical Code.

Step 1. Slide the Device Bracket into the rails on the underside of the Device Plate so that the rectangular

opening in the Bracket is centered over the opening in the Device Plate.

Step 2. Wire and mount the Device using the two #6

screws provided with the Device Plate. Screws

are passed through the holes in the Receptacle

from behind, and thread into the Device Bracket

as shown. Tighten the screw on the corner of the

Bracket in order to lock the Bracket in place.

Step 3. Snap the Device Plate to the Raceway Base

by hooking the edge over the Divider and

squeezing the snap on the Base.

Step 4. Installation complete.

(ALDS4047R shown)

Products Covered: ALDS4047C, ALDS4047D, ALDS4047E, ALDS4047F, ALDS4047R, ALDS4047-2A, & ALDS4047MAB

For more information, visit www.wiremold.com/ds4000.

TO MOUNT ALDS4047D, ALDS4047E, ALDS4047F AND ALDS4047R:

Device

Mounting

Screw

1 2 3 4

Summary of Contents

Page 1 - ALDS4000 Activation

ALDS4000 ActivationINSTALLATION INSTRUCTIONSInstallation Instruction No.: 43373R1 – Updated April 2006Wiremold / Legrand Electrical Systems conform

Page 2 - TO MOUNT ALDS4047C:

Step 1. Pull Wires through opening in Device Plate and snapDevice Plate to Raceway Base.Step 2. Pull Wires through the Device Bracket andwire Receptac

Page 3

CABLE CATEGORY/ O.D. 40% FILL 1/2TYPE DESIGNATION Inches [mm]COMPARTMENTUNSHIELDED 4-pair, 24 AWG Cat 3 0.190 [4.8] 68TWISTED PAIR 4-pair, 24 AWG

Page 4

Wiremold / LegrandU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6

Comments to this Manuals

No comments

Legrand ALDS4000 Designer Series Large Raceway Activation User Manual

Browse online or download User Manual for Hardware Legrand ALDS4000 Designer Series Large Raceway Activation. Legrand ALDS4000 Designer Series Large Raceway Activation User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Legrand ALDS4000 Designer Series Large Raceway Activation