Legrand AU1011-WH User Manual download pdf

301 Fulling Mill Road, Suite G

Middletown, PA 17057

Phone (800) 321-2343 / Fax (717) 702-2546

www.onqlegrand.com

Page 1 of 2

INSTRUCTION/INSTALLATION SHEET

FLUSHMOUNT TRIPLE SOURCE

INPUT

IS-0406 REV. A

1. Introduction

The On-Q/Legrand Flush Mount Triple Source Input, PN

AU1011-xx (see Figure 1), is a wall mounted fixed version of the

lyriQ™ Triple Source Input Unit. It is a component which, when

combined with other essential components and your audio

source equipment, creates a versatile whole-house multi-source

audio system that will fill your rooms with high-quality sound for

years to come. The Flush Mount Triple Source Input may be

combined with a Single Source Input to provide up to 4 audio

sources to the lyriQ™ Four Source, Eight Zone Distribution

Module in the enclosure. The Category 5 technology utilized for

whole house audio distribution with the lyriQ™ system provides

many advantages over other conventional methods of audio

distribution such as a low noise Category 5 wiring scheme, and

infrared control of system components. The Flush Mount Triple

Source Input is available in white (-WH), light almond (-LA) and

black (-BK).

2. Description

The Flush Mount Triple Source Input typically resides at the entertainment center location and is connected to

the enclosure-mounted lyriQ™ Four Source, Eight Zone Distribution Module (4x8) using two Category 5 cable

runs. The Flush Mount Triple Source Input receives up to three line level

stereo audio outputs from the audio

source equipment. If your devices do not have dedicated line level or preamp output, use the tape monitor

outputs. The Flush Mount Triple Source Input provides three sets of RCA jacks for audio source equipment

connection and an adjustable gain control for each to balance the inputs. The green LED next to each set of

RCA jacks indicates an active audio source. IR signal distribution is supported by three (3) IR Emitter Output

ports (IR on Tip, no connection to Ring and Sleeve is grounded) and one (1) IR Target input port (+12V on

Tip, IR on Ring and Sleeve is grounded). The IR Target input is routed only to the three Emitter outputs. A red

LED is provided to indicate IR activity.

3. Installation

IMPORTANT: Read all technical information that is included with all associated lyriQ™ Audio

products before installation of any single component. If you are unsure of any of the following

installation procedures contact On-Q/Legrand Technical Support @ 1-800-321-2343 option 1 or

contact an On-Q/Legrand installer.

NOTE: The Flush Mount Triple Source Input, like other On-Q/Legrand lyriQ™ Audio system

components, is powered by the On-Q/Legrand lyriQ™ Four Source, Eight Zone Distribution Module.

A. Run two Category 5 cables from a two-gang low voltage bracket or electrical box at the room location

containing the Flush Mount Triple Source Input (typically the entertainment center location) to the lyriQ™

Four Source, Eight Zone Distribution Module located in the Enclosure.

B. Make sure that the Power Supply is not connected to the Audio Distribution Module at this time.

Figure 1

1 2

FLUSHMOUNT TRIPLE SOURCE 1

Summary of Contents

Page 1 - FLUSHMOUNT TRIPLE SOURCE

301 Fulling Mill Road, Suite G Middletown, PA 17057 Phone (800) 321-2343 / Fax (717) 702-2546 www.onqlegrand.com

Page 2

301 Fulling Mill Road, Suite G Middletown, PA 17057 Phone (800) 321-2343 / Fax (717) 702-2546 www.onqlegrand.com

Related models: AU1011-BK | AU1011-LA | AU1011-XX |

Comments to this Manuals

No comments

Legrand AU1011-WH User Manual

Browse online or download User Manual for Hardware Legrand AU1011-WH. Legrand AU1011-WH User Manual

Summary of Contents

Related models: AU1011-BK | AU1011-LA | AU1011-XX |

Comments to this Manuals

Related products and manuals for Hardware Legrand AU1011-WH