Legrand 4000 Series Two-Piece Metal Raceway User Manual download pdf

4000 Series

Two-Piece Metal Raceway

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 41403R2 – Updated July 2004

UNSHIELDED SHIELDED

TWISTED PAIR TELEPHONE TWISTED

TYPE 24 AWG, 4-PAIR 24 AWG, NO. OF PAIRS COAXIAL TWINAXIAL PAIR FIBER OPTIC

TWO STRAND (DUPLEX)

CAT. 5 CAT. 3 2 3 4 25 RG58/U RG59/U RG62/U RG6/U 100 OHM TYPE 1 TYPE 2 TYPE 3 MULTIMODE, 62.5/125µm

O.D. inches 0.220 0.190 0.140 0.150 0.190 0.410 0.195 0.242 0.242 0.270 0.330 0.390 0.465 0.245 0.190

O.D. [mm] [5.6] [4.8] [3.6] [3.8] [4.8] [10.4] [5.0] [6.1] [6.1] [6.9] [8.4] [9.9] [11.8] [6.2] [4.8]

40% fill, divided 37 50 92 80 50 10 47 30 30 24 16 11 8 29 49

40% fill, undivided 75 100 183 161 100 21 95 62 62 49 33 23 16 60 100

4000 RACEWAY WIRE FILL CAPACITIES FOR DATA/COMMUNICATIONS

NUMBER OF CONDUCTORS (40% FILL)

WIRE SIZE O.D. WITHOUT DEVICES WITH DUPLEX / RECT. DEVICES WITH SURGE / GFCI DEVICES LARGE SINGLE RECEPTACLES

THHN/THWN inches [mm] 1.59 in

[1025mm

] 2.30 in

[1485mm

] 3.00 in

[1935mm

]

UNDIVIDED DIVIDED UNDIVIDED DIVIDED UNDIVIDED DIVIDED UNDIVIDED DIVIDED

14 AWG 0.111 [2.8] 296 127 165 78 107 49 49 20

12 AWG 0.130 [3.3] 216 93 120 57 78 36 36 15

10 AWG 0.164 [4.2] 136 58 76 36 49 22 22 9

8 AWG 0.216 [5.5] 78 33 43 20 28 13 13 5

6 AWG 0.254 [6.5] 56 24 31 15 20 9 9 3

4AWG 0.324 [8.2] 34 15 – – – – – –

3 AWG 0.352 [8.9] 29 12 – – – – – –

2AWG 0.384 [9.8] 24 10 – – – – – –

4000 RACEWAY WIRE FILL CAPACITY FOR POWER

• Use No. 8 (5/16", 7.9mm head size) flat head fastener or equivalent to

mount base to surface.

• Utiliser une attache à tête plate de calibre 8 (tête de 7.9mm, 5/16" po.)

ou une fixation équivalente pour assujettir le tube guide-fils et les rac-

cords à la surface de montage.

• Use un sujetador de cabeza plana No. 8 (tamaño de cabeza: 7.9mm,

5/16" de pulgada) o su equivalente para unir la canalita y los accesorios

a la superficie de montaje.

•Grounding: Use ground location when provided or install a suitable

ground lug, ring terminal or locknut and ground bushing.

• Mise à la terre: Utiliser l’emplacement de terre prévu ou poser le

matériel qui convient: patte de mise à la terre, cosse circulaire à oeil ou

écrou de blocage et manchon de terre.

• Conexión a tierra: Use un localizador de tierra cuando se proporcione o

instale una orejeta de tierra, anillo terminal o contratuerca y cojinetes de

tierra apropiados.

18"

[45.7cm]

30"

[76cm]

4000B-10640B 640C

4000WC

4010B

4010D 4011

4000C075 = 12" [30.5cm] 4000C135 = 18" [45.7cm]

4000C195 = 24" [60.9cm] 4000C315 = 36" [91.4cm]

4001DA

4000C

Precut

Covers

4014A 4015 4015D 4018

Wiremold Electrical Systems conform to and should be

installed and properly grounded in compliance with

requirements of the current National Electrical Code, Canadian

Electrical Code or codes administered by local authorities.

All electrical products may represent possible shock or fire

hazard if improperly installed or used. Wiremold electrical

products are UL Listed to U.S. and Canadian safety

standards, made for interior use only, and should be installed

in conformance with current local and/or the National

Electrical Code.

1 2

4000 Series 1
Two-Piece Metal Raceway 1

Summary of Contents

Page 1 - Two-Piece Metal Raceway

4000 SeriesTwo-Piece Metal RacewayINSTALLATION INSTRUCTIONSInstallation Instruction No.: 41403R2 – Updated July 2004UNSHIELDED SHIELDEDTWISTED PAIR

Page 2

4012TX40174017N45°4017TC40744074A4086A4046H-21 2 3 41 21 21 21 2 3 44010DFO FiberReady™ Entrance End Fitting1 2344012TX12 345°The Wiremold Company U.S

Comments to this Manuals

No comments

Legrand 4000 Series Two-Piece Metal Raceway User Manual

Browse online or download User Manual for Hardware Legrand 4000 Series Two-Piece Metal Raceway. Legrand 4000 Series Two-Piece Metal Raceway User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Legrand 4000 Series Two-Piece Metal Raceway