Legrand RT1 User Manual

Browse online or download User Manual for Hardware Legrand RT1. Legrand RT1 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 7
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
TROUBLESHOOTING
To test the time switch:
The pilot light behind the ON/OFF button and time delay indicator light should
be ON when the switch is OFF. Press the ON/OFF button. The connected light or
fan comes ON. The pilot light behind the ON/OFF button turns OFF.
The connected light or fan should turn OFF in the number of minutes indicated
by the time selection indicator light. You can turn it OFF sooner by pressing the
ON/OFF button again.
Light or fan will not turn ON (pilot light is visible):
Press ON/OFF button. The connected light or fan should turn ON. If not:
Check the light bulb and/or motor switch on the fan mechanism.
Turn OFF power to the circuit then check wire connections.
Light or fan will not turn ON (no pilot light or indicator is visible):
Shade the switch from external light to make sure that none of the indicator
lights on the switch are ON.
Check the light bulb and/or motor switch on the fan mechanism.
Make certain that the circuit breaker is ON and functioning.
Turn OFF power to the circuit then check wire connections.
Call 1.800.223.4185 for technical support.
Light or fan will not turn OFF:
Press the ON/OFF button. If connected light or fan does not turn OFF, turn
OFF power to the circuit then check wire connections.
Visit our website at: www.passandseymour.com
340792RevB_Eng:NEW 10/23/08 10:54 AM Page 2
Page view 0
1 2 3 4 5 6 7

Summary of Contents

Page 1 - TROUBLESHOOTING

TROUBLESHOOTING To test the time switch: The pilot light behind the ON/OFF button and time delay indicator light should be ON when the switch is OFF.

Page 2 - Limited FIVE YEAR Warranty

Limited FIVE YEAR WarrantyPass & Seymour/Legrand will remedy any defect in workmanship or material in Pass & Seymour/Legrand productswhich may

Page 3 - Installation Instructions

RT1Time Switch7-Button PresetInstallation InstructionsSPECIFICATIONSVoltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120VAC, 60

Page 4 - DESCRIPTION AND OPERATION

DESCRIPTION AND OPERATIONThe RT1 is a time switch that turns OFF the connected light or fan when theselected time expires. The pilot light behind the

Page 5 - INSTALLATION & WIRING

INSTALLATION & WIRING 1. Prepare the switch box.After the power is turned OFF at the circuitbreaker box, remove the existing wall plate andmountin

Page 6

4. Wire the time switch.Twist the existingwires together withthe wire leads on the time switch asindicated in thedrawing. Cap themsecurely using thewi

Page 7

REV. DESCRIPTION INT: REV.DATE APPROVED 1 ECO# C01610 MJS

Related models: RT12 | RW500U | RW500B | RWU600B | RWU600U |

Comments to this Manuals

No comments