Legrand TITAN Series v.2 User Manual download pdf

TITAN

™

INSTALLATION INSTRUCTIONS

INCANDESCENT DIMMERS, MAGNETIC LOW VOLTAGE DIMMERS,

FAN SPEED CONTROLS, DEHUMMER FAN SPEED CONTROLS,

FLUORESCENT DIMMERS P/N 340872

INCANDESCENT DIMMERS “CD” SERIES: These dimmers are for use with

Incandescent and Halogen lamps.

CAUTION: To reduce the risk of overheating and possible damage to other

equipment, do not install to control a receptacle, a fluorescent light, a motor-

operated appliance, or a transformer supplied appliance.

• Do not use this dimmer with incandescent lamps whose power require-

ments exceed maximum power (stated in Watts) of this control.

• Do not connect this dimmer to power source other than 120VAC, 60 Hz only.

• Use copper wire only.

MAGNETIC LOW VOLTAGE DIMMERS “CDLV” SERIES: These dimmers are for

use with Magnetic Low Voltage Incandescent and Halogen lamps.

CAUTION: To reduce the risk of overheating and possible damage to other

equipment, do not install to control a receptacle, a fluorescent light, or a

motor-operated appliance. Connect only in a 120VAC, 60 Hz circuit to control

the primary winding of a transformer supplied incandescent and halogen

lamp. The maximum VA rating of this dimmer applies to the transformer

input, not the load on the transformer secondary.

• Do not use to control a solid state electronic low voltage transformer.

• Do not use with inoperative or missing lamps. Use of this dimmer with

inoperative or missing lamps can create an over current condition which

may damage the transformer. Use transformers that incorporate thermal

protection or a fuse at the primary windings.

• Use copper wire only.

FAN SPEED CONTROLS “CDSC” SERIES: These controls are for use with

ceiling paddle fans with split-capacitor or shaded pole motors only. Use only

with ceiling paddle fans that are marked “Suitable for Use with Solid State

Fan Speed Controls.” Set multi-speed fans to their highest setting before

installing this control.

• Multiple ceiling paddle fans of the same type may be used if the maximum

power (stated in Amps) of this control is not exceeded.

• Do not connect this control to power source other than 120VAC, 60 Hz only.

• Use copper wire only.

• This control is intended for installation in either a metal outlet box or a

polymeric (plastic) outlet box.

DEHUMMER FAN SPEED CONTROLS “CDDH” SERIES: These controls are for

use with a single ceiling paddle fan only.

• Do not use this control with a ceiling paddle fan that exceeds the maximum

power (stated in Amps) of this control.

• Do not connect this control to power source other than 120VAC, 60 Hz only.

• Use copper wire only.

FLUORESCENT DIMMERS “CDFB” SERIES: These dimmers are for use with

electronic dimming ballasts that utilize 2-wire control (see TABLE 1 below):

• Use copper wire only.

FLUORESCENT DIMMERS “CD3FB” SERIES: These dimmers are for use with

electronic dimming ballasts that utilize 3-wire control (see TABLE 2 below):

• Use with Lutron FDB or ECO series Electronic Fluorescent Dimming

Ballasts only. Do not use with any other ballasts.

• Use copper wire only.

ACKAGE CONTENTS

One of the following Dimmers:

Narrow Dimmers Wide Dimmers

Cat no.: Cat no.: Cat no.: Cat no.:

CD700 CD703P CD1600 CD1603P

CD1100 CD1103P CD2000 CD2003P

CDLV700 CDLV703P CDLV1600 CDLV1603P

CDLV1100 CDLV1103P CDFB10 CDFB103P

CDFB5 CDFB53P CDFB16 CDFB163P

CDFB8 CDFB83P CDFB7-277 CDFB73P-277

CDSC6 CD3FB163P CDFB10-277 CDFB103P-277

CDDH16 CD3FB103P-277 CDSC12

CD3FB16

CD3FB10-277

Wire Nuts Coupler Small Coupler Wall Plate

WALL PLATE LABELING SYSTEM

(for use with wall plate that contains label holding slot)

These dimmer wall plates contain a label holding slot. A

0.33" x 1.5" label can be placed in this label holding slot.

These labels can be printed from an Avery

standard

template: Divider tab inserts 8-Tabs or equivalent.

Install the label with the following procedure:

1. Disconnect power to the circuit by removing fuse or

turning circuit breakers OFF.

2. Remove the wall plate by

placing a small flat head

screwdriver into one of

the four slots located at

the top and bottom of the

wall plate. Gently twist a

half turn until the plate

pops off.

3. Slide the label in from the

back side of the wall plate

(as shown at right).

ompatible

P&S Cat #

DFB5

CDFB8

CDFB53P

DFB83P

CDFB10

CDFB16

DFB103P

CDFB163P

CDFB7-277

CDFB10-277

CDFB73P-277

CDFB103P-277

Model

REZ-132-SC, REZ-2S32-SC, REZ-3S32-SC, REZ-154, REZ-2S54,

REZ-1Q18-M2, REZ-2Q18-M2, REZ-1T42-M2, REZ-2T42-M3,

EZ-1TTS40/REZ-1TTS40-SC, REZ-2TTS40/REZ-2TTS40-SC,

IEZ-2S24-D, REB-2S26-M1-LS-DIM/REB-2S26-M1-BS-DIM

2W-T426-120-1-S, 2W-T426-120-2-S, 2W-T432-120-1-S,

2W-T432-120-2-S, 2W-T832-120-1-S, 2W-T832-120-2-S

QTP1x32T8/UNV DIM, QTP2x32T8/UNV DIM, QTP3x32T8/UNV

IM, QTP4x32T8/UNV DIM

VEZ-132-SC, VEZ-2S32-SC, VEZ-3S32-SC, VEZ-154, VEZ-2S54,

VEZ-1Q18-M2, VEZ-2Q18-M2, VEZ-1T42-M2, VEZ-2T42-M3,

VEZ-1TTS40/VEZ-1TTS40-SC, VEZ-2TTS40/VEZ-2TTS40-SC,

IEZ-2S24-D

QTP1x32T8/UNV DIM, QTP2x32T8/UNV DIM, QTP3x32T8/UNV

DIM, QTP4x32T8/UNV DIM

Voltage

20VAC

60 HZ

277VAC

60 HZ

allast

Manufacturer

Advance

utron

Sylvania/

sram

Advance

Sylvania/

Osram

CD3FB16

CD3FB163P

CD3FB10-277

CD3FB103P-277

120VAC

60 HZ

277VAC

60 HZ

Lutron

FDB-T418-120-1-S, FDB-T418-120-2-S,

FDB-T426-120-1-S, FDB-T426-120-2-S,

FDB-T418-120-1-S, FDB-T418-120-2-S,

FDB-T426-120-1-S, FDB-T426-120-2-S,

FDB-T432-120-1-S, FDB-T432-120-2-S,

FDB-T442-120-1-S, FDB-T442-120-2-S,

FDB-1643-120-1, FDB-1643-120-2,

FDB-1643-120-3, FDB-2227-120-1,

FDB-2227-120-2, FDB-2227-120-3,

FDB-2243-120-1, FDB-2243-120-2

FDB-T418-277-1-S, FDB-T418-277-2-S,

FDB-T426-277-1-S, FDB-T426-277-2-S,

FDB-T418-277-1-S, FDB-T418-277-2-S,

FDB-T426-277-1-S, FDB-T426-277-2-S,

FDB-T432-277-1-S, FDB-T432-277-2-S,

FDB-T442-277-1-S, FDB-T442-277-2-S,

FDB-1643-277-1, FDB-1643-277-2,

FDB-1643-277-3, FDB-2227-277-1,

FDB-2227-277-2, FDB-2227-277-3,

FDB-2243-277-1, FDB-2243-277-2

HL3-T426-120-1-S, HL3-T432-120-1-S,

FDB-T524-120-1, FDB-T524-120-2,

FDB-T539-120-1, FDB-T539-120-2,

FDB-T554-120-1, FDB-T554-120-2,

FDB-2427-120-1, FDB-2427-120-2,

FDB-2427-120-3, FDB-3627-120-1,

FDB-3627-120-2, FDB-3627-120-3,

FDB-4827-120-1, FDB-4827-120-2,

FDB-4827-120-3, FDB-6027-120-1,

FDB-6027-120-2, FDB-7280-120-1,

FDB-8480-120-1, FDB-9680-120-1,

H3DT832CUNV110, H3DT832CUNV117,

H3DT832CUNV210, H3DT832CUNV217

HL3-T426-277-1-S, HL3-T432-277-1-S,

FDB-T524-277-1, FDB-T524-277-2,

FDB-T539-277-1, FDB-T539-277-2,

FDB-T554-277-1, FDB-T554-277-2,

FDB-2427-277-1, FDB-2427-277-2,

FDB-2427-277-3, FDB-3627-277-1,

FDB-3627-277-2, FDB-3627-277-3,

FDB-4827-277-1, FDB-4827-277-2,

FDB-4827-277-3, FDB-6027-277-1,

FDB-6027-277-2, H3DT832CUNV110,

H3DT832CUNV117, H3DT832CUNV210,

H3DT832CUNV217

P&S

Cat. #

Voltage

Ballast

Manufacturer

1% – Hi-lume, Hi-lume 3D

Model

5% – Compact SE 10% – Eco-10

Table 1

Table 2

E3-T514C-120-1, E3-T514C-120-2,

E3-T521C-120-1, E3-T521C-120-2,

ECO-T528-120-1, ECO-T528-120-2,

ECO-T524-120-1, ECO-T524-120-2,

ECO-T5H39-120-1, ECO-T5H39-120-2,

ECO-T554-120-1, ECO-T554-120-2,

ECO-T539-120-1, ECO-T539-120-2,

ECO-T539-120-3, ECO-T540-120-1,

ECO-T540-120-2, ECO-T540-120-3,

ECO-T550-120-1, ECO-T550-120-2,

ECO-T817-120-1, ECO-T817-120-2,

ECO-T817-120-3, ECO-T825-120-1,

ECO-T825-120-2, ECO-T832-120-1-L,

ECO-T832-120-1-T, ECO-T832-120-2-L,

ECO-T832-120-2-T, ECO-T832-120-3

E3-T514C-277-1, E3-T514C-277-2,

E3-T521C-277-1, E3-T521C-277-2,

ECO-T528-277-1, ECO-T528-277-2,

ECO-T524-277-1, ECO-T524-277-2,

ECO-T5H39-277-1, ECO-T5H39-277-2,

ECO-T554-277-1, ECO-T554-277-2,

ECO-T539-277-1, ECO-T539-277-2,

ECO-T539-277-3, ECO-T540-277-1,

ECO-T540-277-2, ECO-T540-277-3,

ECO-T550-277-1, ECO-T550-277-2,

ECO-T817-277-1, ECO-T817-277-2,

ECO-T817-277-3, ECO-T825-277-1,

ECO-T825-277-2, E3-T832C-277-1,

ECO-T832-277-1-L, ECO-T832-277-1-T,

ECO-T832-277-1, E3-T832C-277-2,

ECO-T832-277-2-L, ECO-T832-277-2-T,

ECO-T832-277-2, ECO-T832-277-3

1 2 3 4

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

TITAN™INSTALLATION INSTRUCTIONSINCANDESCENT DIMMERS, MAGNETIC LOW VOLTAGE DIMMERS,FAN SPEED CONTROLS, DEHUMMER FAN SPEED CONTROLS,FLUORESCENT DIMMERS

Page 2 - WIRING INFORMATION

SINGLE GANG INSTALLATION INSTRUCTIONS1. Disconnect power to circuit by removing fuse or turncircuit breakers OFF before installing.2. For existing ins

Page 3 - MULTIPLE GANGING OF DIMMERS

MULTI GANG INSTALLATION INSTRUCTIONSFINS ARE NOT REMOVEDNOTE: A 3-gang Installation of Narrow Dimmers is shown and describedbelow. Any Combination of

Page 4 - Wide Dimmers

Related models: TITAN Series v.1 | TITAN Series Installation | TITAN Series v.4 |

Comments to this Manuals

No comments

Legrand TITAN Series v.2 User Manual

Browse online or download User Manual for Hardware Legrand TITAN Series v.2. Legrand TITAN Series v.2 User Manual

Summary of Contents

Related models: TITAN Series v.1 | TITAN Series Installation | TITAN Series v.4 |

Comments to this Manuals

Related products and manuals for Hardware Legrand TITAN Series v.2