Legrand 2410D Divided Entrance End Fitting User Manual download pdf

2410D

Divided Entrance End Fitting

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 1 007 122 – October 2007

Wiremold/Legrand electrical systems conform to and should be

properly grounded in compliance with requirements of the current

National Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or fire

hazard if improperly installed or used. Wiremold/Legrand electrical

products may bear the mark as UL Listed and/or Classified and should

be installed in conformance with current local and/or the National

Electrical Code.

IMPORTANT: Please read all instructions

before beginning.

1. Slide the tab on the divider into the slot on the

Entrance End Fitting base.

2. Slide the tongue on the Entrance End Fitting

base into the 2400D Raceway Base.

3. Attach Entrance End Fitting to the wall using #8 (5/16"

[7.9mm] head size) flat head fasteners or equivalent.

4. Slide the Raceway Cover into the slot on the Divider

and snap the Cover onto the Raceway Base.

1 2

2410DDivided Entrance End FittingINSTALLATION INSTRUCTIONSInstallation Instruction No.: 1 007 122 – October 2007Wiremold/Legrand electrical systems

Page 2

Wiremold / LegrandU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-

No comments

Legrand 2410D Divided Entrance End Fitting User Manual