Legrand 24DWND User Manual download pdf

24DWND 24DWNR

Downward-Facing Device Activations

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 1 007 174 – October 2007

Wiremold/Legrand electrical systems conform to and should be

properly grounded in compliance with requirements of the current

National Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or fire

hazard if improperly installed or used. Wiremold/Legrand electrical

products may bear the mark as UL Listed and/or Classified and should

be installed in conformance with current local and/or the National

Electrical Code.

IMPORTANT: Please read all instructions

before beginning.

1. Remove appropriate twistout for application.

2. Place upper edge of bracket under

upper lip of raceway.

3. Attach bracket to the wall using #8 (5/16" [7.9mm] head

size) flat head fastener or equivalent.

4. Feed wire through twistout and snap on

raceway covers.

1 2

24DWND 24DWNRDownward-Facing Device ActivationsINSTALLATION INSTRUCTIONSInstallation Instruction No.: 1 007 174 – October 2007Wiremold/Legrand elect

Page 2

Wiremold / LegrandU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-

Related models: 24DWNR | WKD ProSeries Underfloor Duct Opening Reducer | 880CM1-1 | 880CM2-1 | 880CM3-1 | 880CS1-1 | 880CS1-NA | 880CS2-1 | 880CS2-NA | 880CS3-1 | 880CS3-NA | 880M1 | 880M2 | 880M3 | 880S1 | 880S2 | 880S3 |

No comments