Legrand AC1011 User Manual download pdf

301 Fulling Mill Road, Suite G

Middletown, PA 17057

Phone (800) 321-2343 / Fax (717) 702-2546

www.onqlegrand.com

Page 1 of 1

INSTRUCTION/INSTALLATION SHEET

PCB Mounting Bracket for Security

and Automation

IS-0395 REV. O

1. Introduction

The On-Q/Legrand PCB Mounting Bracket for Security and Automation (P/N AC1011) is designed to easily

mount a variety of security or automation printed circuit boards in an On-Q/Legrand enclosure.

2. Description

The On-Q PCB Mounting Bracket comes with

four mounting tabs used to hold the printed

circuit board firmly to the bracket (see Figure 1).

3. Installation

Peel off the backing of the four mounting tabs

and place them on the bracket so that all four

sides of the printed circuit board will be held

securely in place by the mounting tabs (see

Figure 1). When properly installed, the printed

circuit board locks into the mounting tabs (see

Figure 2).

a. To install the bracket in an enclosure, align

and insert the stationary tabs on the left

hand side of the plate into the square slots

in the enclosure and use the two push-pins

on the right side of the plate to secure the

plate to the enclosure (see Figure 3).

Figure 1

Figure 2

Figure 3

AC1011

301 Fulling Mill Road, Suite G Middletown, PA 17057 Phone (800) 321-2343 / Fax (717) 702-2546 www.onqlegrand.com

No comments

Legrand AC1011 User Manual