Legrand AL2040A Aluminum Surface Raceway User Manual download pdf

AL2400 RACEWAY WIRE FILL CAPACITIES FOR DATA/COMMUNICATION

CABLE/WIRE SIZE [In.] [mm] 20% FILL* 40% FILL**

UNSHELDED 4-pair, 24 AWG, Cat. 5 0.220 [5.6] 8 17

TWISTED PAIR 4-pair, 24 AWG, Cat. 3 0.190 [4.8] 11 23

4-pair, 24 AWG, Cat. 6 0.250 [6.3] 6 13

TELEPHONE 2-pair, 24 AWG 0.140 [3.6] 22 44

3-pair, 24 AWG 0.150 [3.8] 19 38

4-pair, 24 AWG 0.190 [4.8] 11 24

25-pair, 24 AWG 0.410 [10.4] 2 5

COAXIAL RG58/U 0.195 [5.0] 11 22

RG59/U 0.242 [6.1] 7 14

RG62/U 0.242 [6.1] 7 14

RG6/U 0.270 [6.9] 5 11

TWINAXIAL 100 Ohm 0.330 [8.4] 3 7

SHELDED Type 1 0.390 [9.9] 2 5

TWISTED PAIR Type 2 0.465 [11.8] 2 4

Type 3 0.245 [6.2] 7 14

AL2400 Aluminum

Surface Raceway

INSTALLATION INSTRUCTIONS

Installation Instruction No.: INST007 R1 – Updated October 2003

AL2400 RACEWAY WIRE FILL CAPACITIES FOR POWER

WIRE TYPE TW THW RHH/RHW THHN/THWN

POWER WIRING 6 AWG 8 8 5 13

WITHOUT DEVICE 8 AWG 14 11 8 18

1.7 sq. in. cross section 10 AWG 31 22 15 37

12 AWG 40 27 24 58

14 AWG 50 33 30 78

POWER WIRING AWG 6 AWG 3

WITH DEVICE 8AWG 3 4

5-20R duplex devices 10 AWG 6 5 3 8

1.35 sq. in. cross section 12 AWG 8 6 5 12

14 AWG 10 7 6 16

NOTE:* 20% cable fill is calculated to approximate reduction in cable capacity due to connectors mounted within raceway and fittings that may restrict

cross sectional area.

** 40% cable fill is the maximum designed cable fill base on a proposed revision to TIA/EIA 569-A.

Wiremold Electrical Systems conform with, and should be installed and

properly grounded in compliance with requirement of the current

National Electrical Code or codes administered by local authorities.

All electrical products may represent a possible shock or fire hazard

if improperly installed or used. Wiremold electrical products are UL list-

ed, made for interior use and should be installed by qualified

electrical people in conformance with current local and/or the

National Electrical Code.

Note: Raceway may be configured in single or multiple channels

to accommodate power or communications wiring.

MAXIMUM CROSS SECTION

Without Device

1.5 sq. in.

[38mm]

[51mm]

1 9/32"

[33mm]

With 5-20R

1.35 sq. in.

[34mm]

1 2 3 4

Summary of Contents

Page 1 - Surface Raceway

AL2400 RACEWAY WIRE FILL CAPACITIES FOR DATA/COMMUNICATIONODCABLE/WIRE SIZE [In.] [mm] 20% FILL* 40% FILL**UNSHELDED 4-pair, 24 AWG, Cat. 5 0.220 [5.6

Page 2 - AL2451H BOX ADAPTER

AL2400B BASE and AL2400C COVERAL2401 COUPLINGAL2409 GROUND ADAPTERAL2451H BOX ADAPTERAt AL2400B base section butt joints, slide AL2401 Couplinginto fl

Page 3 - AL2410B2 FEED END FITTING

AL2410B BLANK END FITTINGAL2410B2 FEED END FITTINGAL2440A IN-LINE SINGLE POLE SWITCHAt end of AL2400B Raceway run, slide AL2410B2 Feed Endin last base

Page 4 - AL2418 EXTERNAL ELBOW

AL2411 90° FLAT ELBOW AL2417 INTERNAL ELBOWAL2415 TEE ELBOWAL2418 EXTERNAL ELBOWAL2400WC WIRE CLIPAt 90° turn on same surface, position AL2411 Flat El