Legrand WAPBRKT Overhead Wireless Access Point Bracket User Manual

Browse online or download User Manual for Hardware Legrand WAPBRKT Overhead Wireless Access Point Bracket. Legrand WAPBRKT Overhead Wireless Access Point Bracket User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Wiremold Electrical Systems conform to and should be
installed and properly grounded in compliance with
requirements of the current National Electrical Code, Canadian
Electrical Code or codes administered by local authorities.
All electrical products may represent possible shock or fire
hazard if improperly installed or used. Wiremold electrical
products are UL Listed to U.S. and Canadian safety
standards, made for interior use only, and should be installed
in conformance with current local and/or the National
Electrical Code.
Installation onto Threaded Rod or underneath Center Spine/Ladder Tray
Installation underneath Wire Basket Tray
OVERHEAD WIRELESS
ACCESS POINT BRACKET
INSTALLATION INSTRUCTIONS
Installation Instruction No.: 42593 – August 2004
Secure Access Point to bracket using velcro straps through slot
openings in bracket. Attach support bar to bracket with included
bolts & nuts. Attach threaded rod to bar, using a nut on each
side to secure. Use correct hole in support bar to fit your
threaded rod size (1/4" & 1/2" [6.4mm & 12.7mm] provided).
With Wire Basket trays less than 12" [305mm] wide, bracket
may be hung sideways at a right angle to the direction of the
tray. Secure bracket to tray using hardware shown through
holes in bracket flanges.
Bracket attaches to wire baskets of 12" [305mm] or wider
the same as with smaller tray, except that the bracket may be
installed inline with the tray.
When hanging under center spine or ladder tray, extend thread
rod past normal tray hanger and attach support bar at the end
of the rod.
Note: This picture also depicts an alternative for hanging the
Access Point by strapping underneath the bracket.
Velcro Straps
(Two Included)
Threaded Rod & Nuts
(Not Included)
M6 x 14 Bolt
(Two Included)
Support Bar
(Included)
Nut
(Two Included)
Bolt, Nut, & Small
Clamp from WBSPLKIT
(Not Included)
The Wiremold Company
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251
Canada:
850 Gartshore Street • Fergus, Ontario N1M 2W8
1-800-741-7957 • FAX 519-843-5980
42953 – August 2004 – For latest specs visit www.wiremold.com
© Copyright 2004 The Wiremold Company All Rights Reserved
Page view 0
1

Summary of Contents

Page 1 - ACCESS POINT BRACKET

Wiremold Electrical Systems conform to and should be installed and properly grounded in compliance with requirements of the current National Electrica

Comments to this Manuals

No comments