Legrand 881FC User Manual

Browse online or download User Manual for Hardware Legrand 881FC. Legrand 881FC User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Wiremold/Legrand electrical systems conform to and should be
properly grounded in compliance with requirements of the current
National Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire hazard
if improperly installed or used. Wiremold/Legrand electrical products
may bear the mark as UL Listed and/or Classified and should
be installed in conformance with current local and/or the National
Electrical Code.
881FC
Fire Classified Floor Boxes
INSTALLATION INSTRUCTIONS
Installation Instruction No.: 1 007 939 – July 2008
IMPORTANT: Please read all instructions
before beginning.
Step 1 MEASURE AND LOCATE BOX.
Box must be located over deck valley directly above
thickest region of concrete.
Step 2 PREASSEMBLY
Secure box to mounting plate with cable ties or wire.
Loosely insert adapters and conduit elbows into box.
Offset displaced
downward
Plug
Second PVC
Elbow (Optional)
1" Trade Size
PVC Elbow
Step 3 CUT OPENINGS INTO DECK
Measure to the outside edge of the 1" trade size PVC
elbow to the box centerline. Cut a 2" [51mm] tangent to
this dimension. Repeat on opposite side if both PVC
elbows are required.
2"
[51mm]
Cut ø 2"
[51mm] Hole
through Deck
Distance to outside
edge of elbow
Step 4 ATTACH MOUNTING PLATE & GLUE
Secure mounting plate to deck by welding or screws.
Glue elbow(s) and adapter(s) in place. Seal any unused
hub with hub plug provided. Offset in mounting plate is
positioned downward. Seal off any excessive gaps
around elbows with duct tape.
Secure to Deck with
Screws or weld
1" Trade Size
PVC Elbow
Seal opening end
with Duct Tape
Page view 0
1 2

Summary of Contents

Page 1 - Fire Classified Floor Boxes

Wiremold/Legrand electrical systems conform to and should be properly grounded in compliance with requirements of the currentNational Electrical Code

Page 2

Step 5 SECURE CONCRETE COVER & POURInsert body spacer and concrete cover in box. Do not remove intumescent pads. Pour concreteto requires height.C

Comments to this Manuals

No comments