Legrand DS4000 Raceway Base User Manual download pdf

DS4000 Raceway

Base & Cover

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 43324 – December 2005

Wiremold / Legrand Electrical Systems conform to and should be

installed and properly grounded in compliance with requirements

of the current National Electrical Code, Canadian Electrical

Code, or codes administered by local authorities.

All electrical products may represent possible shock or fire

hazard if improperly installed or used. Wiremold electrical

products are UL listed to U.S. and Canadian safety

standards, made for interior use only, and should be installed

in conformance with current local and/or the National

Electrical Code.

Step 1. If the installation requires Fittings,

start at an appropriate location

such as a corner. Refer to specific

fitting installation instructions for

proper mounting.

Step 3. Butt succeeding DS4000 Base Sections

tightly to installed base in order to

maintain hole alignment. Slide Couplings

into place and tighten.

NOTE: Raceway Base includes Couplings and Wire Clips. Wire Clips are factory installed in the

lower channel of each Raceway Base section. Make sure base sections are properly

oriented prior to securing to the wall.

Products Covered: DS4000B, DS4000C.

Step 2. Leaving Coupling loose, mate DS4000 Base section to installed

Fitting. Using up to 4" [102mm] of lateral adjustment provided by

Couplings, align Mounting Hole with Wall Stud. Secure to wall using

#8 Fasteners 48" [1.2m] apart. Tighten Coupling Screws.

For more information, visit www.wiremold.com/ds4000.

Maximum

4" [102mm]

adjustment

Stud Location

Adjust-to-Fit™

Couplings

1 2 3 4

Summary of Contents

Page 1 - Base & Cover

DS4000 Raceway Base & CoverINSTALLATION INSTRUCTIONSInstallation Instruction No.: 43324 – December 2005Wiremold / Legrand Electrical Systems con

Page 2 - Cut Here

Step 4. Install the next fitting. Measure and cut DS4000 Base at the closest score short of the fitting. Install DS4000Base and tighten Coupling screw

Page 3

DS4000C Cover Installation:Step 1.Step 2.DS4000C Cover RemovalHook Cover into Base Section. Installation Complete.All Fittings and Activation Covers/F

Page 4

Wiremold / LegrandU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6