Legrand RC7AFFTC User Manual download pdf

Products Covered: RC7FF114TC, RC7FF114TCLJB

CAUTION DO NOT operate tile stripper or resurfacing equipment over top of covers. This may result in damage to the

surface finish of the product.

Suitable for use in air handling spaces in accordance with Sec. 300-22 (C) of the National Electric Code.

RC7FF114TC &

RC7FF114TCLJB

Poke-Thru Series

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 1 003 378 – March 2003

Walker

electrical systems conform to and should be properly grounded

in compliance with requirements of the current National Electrical Code

or codes administered by local authorities.

All electrical products may present a possible shock or fire hazard if

improperly installed or used. Walker electrical products may bear the

mark as UL Listed and/or Classified and should be installed in

conformance with current local and/or the National Electrical Code.

24" [610mm] Min

Center – Center

6 1/2"

[165mm] Diameter

3" [76mm] Diameter Core Drill

3 1/16" [78mm] Actual Diameter

Push Down

CAUTION: Be certain to drill hole at least 4" [102mm] from any wall or

pillar to leave enough room for poke-thru cover assembly.

CAUTION: For tile thickness greater than 3/4" [19.1mm],

consult factory.

CAUTION: Poke-Thru cannot be rotated in hole after insertion

into the floor.

IMPORTANT: Please read all instructions

before beginning.

CAUTION: Holes shall be spaced a minimum of 2' [610mm]

on center and not more than one hole per each

65 sq. ft. [6 sq. m] of floor area in each span.

Step 2 Remove 6 1/2" [165mm] section from carpet

or tile. Use template provided.

Step 1 Layout and locate position of hole(s).

Step 3 Core drill hole.

Step 4 Insert assembly into hole.

RC7FF114TC

1 2 3 4

Summary of Contents

Page 1 - Poke-Thru Series

Products Covered: RC7FF114TC, RC7FF114TCLJB CAUTION DO NOT operate tile stripper or resurfacing equipment over top of covers. This may result in damag

Page 2

ReplaceRC7FF114TCLJB Poke-Thru(Applies to installations in the City of Chicago or other locations where local codesrequire the use of EMT compression

Page 3

The RC7FF114TC Series Poke-Thru Devices are UL Listed and Classified to U.S. and Canadian safety standards to the following conditions:The RC7FF114TC

Page 4 - Carpet/Tile Cutout Template

The Wiremold Company U.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-2

Legrand RC7AFFTC User Manual

Browse online or download User Manual for Hardware Legrand RC7AFFTC. Legrand RC7AFFTC User Manual

Summary of Contents

More documents for Hardware Legrand RC7AFFTC

Comments to this Manuals

Legrand RC7AFFTC User Manual

Browse online or download User Manual for Hardware Legrand RC7AFFTC. Legrand RC7AFFTC User Manual

Summary of Contents

More documents for Hardware Legrand RC7AFFTC

Comments to this Manuals

Related products and manuals for Hardware Legrand RC7AFFTC