Legrand 880MP User Manual download pdf (Page 2)

Floor Finishing and Activation:

9. After concrete has cured, saw off the

remainder of the box(es) at floor level

using a wood saw and remove the box

spacer. If the final floor covering is a

thicker than 5/16" [7.9mm], leave enough

of the box protruding above the floor to

compensate (see Figure 4).

10. Wire fill capacity is determined by reading

the first legible volume calibration along

the interior of the box.

11. A cover plate adapter (Cat. No. 880MPA)

is required for each gang or compartment

of the activation. The adapter is installed

by pushing it into the box opening until

firmly seated. The ratchet teeth along

the box interior will retain the adapter

without the use of screws or glue.

12. Bend radius control for fiber optic

communication activations is maintained

by wrapping the cable around the storage

loop on the underside of the cover

adapter prior to installation

(see Figure 5).

13. Attach the trim flange (sold separately)

using four #8-32 screws supplied with trim

flange (see Figure 6).

14. Complete the installation by attaching

the appropriate cover plate option.

Figure 4

Figure 5

Figure 6

Fiber Storage Loop

The Wiremold Company

U.S. and International:

60 Woodlawn Street • West Hartford, CT 06110

1-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251

Canada:

850 Gartshore Street • Fergus, Ontario N1M 2W8

1-800-741-7957 • FAX 519-843-5980

IA0145R2 1202

© Copyright 2002 The Wiremold Company All Rights Reserved

1 2

Comments to this Manuals

No comments