®Walkerduct Pro SeriesModular AftersetI N S T A L L A T I O N I N S T R U C T I O N SInstallation Instruction No.: 1 000 494 R2 – Updated May 2009
2 1/2" [64mm]Diameter HoleStep 5. Using a 2 1/2" [64mm] diameter hole saw, drillopening in center of duct. For two- or three-gang, use templ
Center MarkerALTERNATIVE AFTERPOUR INSTALLATION:Step 1. Locate the center line of the raceway by eitherusing the markers at the ends of the raceway, o
PRE-POUR INSTALLATION:Step 1. For single preset: Mark a center line down themiddle of the duct and mark location for preset.For two- or three-gang pre
PRESET INSERT INSTALLATION DETAILSTo Field Installed Presets:1. Be certain correct preset height is selected.2. Position preset so that hooks on botto
TEMPLATE – Used to locate center of 2 1/2" [64mm] diameter holes cut in duct.NOTE: Holes shown are not 2 1/2" [64mm],however center location
Wiremold/LegrandU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-62
Comments to this Manuals