Legrand WKD ProSeries Underfloor Duct System User Manual download pdf

S165 BLK/BRN

S166 BLK/BRN

Nonmetallic Fittings

INSTALLATION INSTRUCTIONS

Walker

electrical systems conform to and should

be properly grounded in compliance with require-

ments of the current National Electrical Code or

codes administered by local authorities.

All electrical products may present a possible

shock or fire hazard if improperly installed or

used. Walker electrical products may bear the

mark as UL Listed and/or Classified and should

be installed in conformance with current local

and/or the National Electrical Code.

1. Locate centerline of duct from measurement from

Cat. No. 415 insert markers, existing presets and

activation, or junction boxes. Core drill 4" [102mm]

diameter hole in concrete.

NOTE: Do not drill through the metal top of raceway.

2. Drill 2 1/2" [64mm] diameter hole in duct in center

of 4" [102mm] diameter hole.

3. Install attaching ring (Cat. No. 439) in hole using

of locking tabs in bottom of attaching ring. As the

tabs are tightened, the locking tabs will rotate on

inside of raceway. Tighten these screws firmly to

lock attaching ring in place. Locking tabs are to

be secured parallel to the center line of the duct.

4. Attach flange (P/N 536089) to attaching ring with

four #6 flathead screws. (Length of screws deter-

mined by depth of slab.)

5. Install wires through hole in bottom of attaching ring.

6. Wire device and then attach to flange.

7. Place gasket on single receptacle plate.

8. Attach receptacle plate to flange with four

flathead screws.

4" [102mm]

Core Drilled Hole

Duct 2 1/2"

[64mm] Dia. Hole

439 Attaching Ring

for Use with

Polycarbonate

Fittings only and

only as an Afterset

S124BLK/BRN

Carpet Flange

439 Afterset Installed

S130BLK/BRN

Duplex Plate

with Membrane

S166BLK/BRN

Communication Plate

Walker Systems, Inc.

1000 Innovation Drive, Williamstown, WV 26187

IB0003 1100

S165 BLK/BRN 1
S166 BLK/BRN 1

Summary of Contents

Page 1 - S166 BLK/BRN

S165 BLK/BRN S166 BLK/BRN Nonmetallic Fittings INSTALLATION INSTRUCTIONSWalker® electrical systems conform to and shouldbe properly grounded in compli

Related models: WKD ProSeries Underfloor Duct Activation Fittings

Comments to this Manuals

No comments

Legrand WKD ProSeries Underfloor Duct System User Manual

Browse online or download User Manual for Hardware Legrand WKD ProSeries Underfloor Duct System. Legrand WKD ProSeries Underfloor Duct System User Manual

Summary of Contents

Related models: WKD ProSeries Underfloor Duct Activation Fittings

Comments to this Manuals

Related products and manuals for Hardware Legrand WKD ProSeries Underfloor Duct System